METAL WORKING FLUIDS:
TL SOLUBLE CUTTING OIL
Performance Level : IS 1115: 1986
These are premium quality soluble cutting oils blended from mineral oils, emulsifier and additives. If forms a stable emulsion of the oil in water type.These type of oils are suitable for Hard water .
Application: This oil is recommended for cutting operations on ferrous and non- ferrous materials.
| Sr. No. | Characteristics | TL SOLUBLE CUTTING OIL |
| 1 | Appearance | Light brown clear fluid |
| 2 | Ash, % by mass | 1.29 |
| 3 | Copper strip corrosion test at 100℃ for 3 hrs. | 1a |
| 4 | Flash Point, COC, ℃ | 160 |
| 5 | Water, % by mass | 2 |
| 6 | Emulsion Test, 5:1 & 20:1 ratio in water of 400 ppm hardness (as CaCo3) | No oil, No cream |
| 7 | Frothing Test
5:1 & 20:1 ratio in 200 ppm hardness (as CaCO3) |
Passes |
| 8 | 50:1 ratio with distilled water | – |
| Cast Iron corrosion test | – | |
| 20:1 ratio emulsion with 400 ppm hard water (as CaCO3) | 0/0-0
(No Corrosion Passed) |
|
| 9 | Thermal Stability Test | Passes |
| 10 | K.V. cSt @ 40 ℃ | 25 to 40 |
Note: The above mentioned data are typical and it may vary with batch to batch within Permissible specification limits.
Packing Size: 26 liters, 50 liters, 210 liters
